Plasma chemistry · syngas

Syngas from biogas, CO₂ and steam

CYRANNUS® microwave plasma turns methane, CO₂ and steam into hydrogen and carbon monoxide: the feedstock for e-fuels and methanol.

The chemistry

Methane, CO₂ and steam in, H₂ and CO out

The feed mix sets the H₂/CO ratio. More steam means more hydrogen.

  • Dry reformingCH4 + CO2 → 2 CO + 2 H2H₂/CO = 1 · uses CO₂ as carbon source
  • Steam reformingCH4 + H2O → CO + 3 H2H₂/CO = 3 · more hydrogen
  • CO₂ splittingCO2 → CO + ½ O2turns CO₂ into CO

Overall reactions; the plasma runs several of them at once. Stoichiometric H₂/CO ratios.

Results

Measured in the Plasma2X project

iplas built the plasma system; it was operated and measured together with the project partners.

up to 85 %
syngas yield under selected conditions
0.5 – 3
adjustable H₂/CO ratio, set by steam dosing
15 bar
pressure test passed
0
electrodes in the plasma, so no electrode wear

Source: Plasma2X research project (HAW Hamburg/CC4E, iplas and partners). Selected results have been published.

Fischer-Tropsch fuels

Syngas becomes liquid fuel for aviation, shipping and heavy transport.

Methanol

A base chemical and fuel, made from the same syngas.

Runs with renewables

The plasma starts fast, so it can follow wind and solar power.

Who it is for

Customers who gain most

Biogas

Biogas plant operators

Raw biogas contains methane and CO₂: both become syngas, without separating them first.

E-fuels

Power-to-liquid developers

Syngas with the H₂/CO ratio your Fischer-Tropsch or methanol step needs.

CO₂ use

Industrial CO₂ sources

CO₂ becomes a carbon source for fuels and chemicals instead of an emission.

Research

Universities and institutes

A flexible plasma reactor for studying feed mixes and operating points.

FAQ

Plasma syngas: short answers

Can microwave plasma make syngas from biogas?

Yes. In the Plasma2X project a CYRANNUS® microwave plasma system from iplas converts methane, CO₂ and steam into hydrogen and carbon monoxide, with syngas yields of up to 85 % under selected conditions.

Which H₂/CO ratio can a plasma reactor deliver?

Between about 0.5 and 3. The ratio is set mainly by the amount of steam fed to the plasma, so it can match Fischer-Tropsch or methanol synthesis.

Does the plasma need electrodes?

No. The microwave plasma burns without electrodes in the reaction zone, so there is no electrode wear.

Can plasma syngas run on renewable power?

Yes. The plasma runs on electricity and starts fast, so it can follow the supply of wind and solar power.

Discuss a syngas project

Tell us your feed gas and the syngas you need.

Develop with us

or call +49 2241 93268-0 · info@iplas.eu